Communications
23
10.3
UPS Intelligent Communications
The S4K5U is equipped with two Intellislot® ports to provide advanced communication and monitor-
ing options.
The Intellislot port closer to the corner of the UPS chassis is the serial card slot. This Intellislot port is
used for the SNMP WEB CARD. The other Intellislot port is used for
RELAY CARD-INT or the MULTIPORT4CARD.
Sola/Hevi-Duty's MultiLink software continually monitors the UPS and can shut down your computer
or server in the event of an extended power failure.
MultiLink can also be configured for use without the serial cable when the Intellislot)
SNMP WEB CARD is installed in the UPS. Additionally, MultiLink can be configured to coordinate
shutdown across the network with other computers running MultiLink when you purchase a Multi-
Link License Kit. For more information about the Intellislot SNMP WEB CARD and MultiLink
license Kits, visit our Web site (www.Sola/Hevi-Duty.com) or contact your local dealer or Sola/Hevi-
Duty representative.
Several option cards are available for use in the Intellislot port of the S4K5U. The Intellislot
SNMP WEB CARD provides SNMP and Web-based monitoring and control of the UPS across the net-
work.
The Intellislot MULTIPORT4CARD allows you to install MultiLink software on four computers and
coordinate shutdown in the event of a power failure.
The Intellislot RELAY CARD-INT provides dry contact relay outputs for custom wired applications
and delivers support for built-in shutdown for AS/400 systems.
NOTE
The SNMP WEB CARD serial port cable should be used only for the initial card setup. Remove
the cable after setup is complete.
When the DB9 serial port cable is removed, the SNMP WEB CARD DB9 connector needs to be
covered. The DB9 cover is included with the UPS.
!
CAUTION
To maintain safety (SELV) barriers and for electromagnetic compatibility, signal cables
should be segregated and run separate from all other power cables, where applicable.
DB9 (RS232) port
covered
Sola/Hevi-Duty’s SNMP WEB CARD
