SoftBank SoftBank 101N, Руководство пользователя

Страница: 12 / 96

10
Insert SD Card
・Slide SD Card in horizontally (terminal side down) until it
locks.
・Do not insert other objects.
Insert Battery
・Engage Battery studs in slots (product name facing up),
slide Battery in so that terminals meet, then lower .
・Do not force Battery into place if studs are not engaged in
slots, because you might break studs.
Slide Lock Switch to LOCK side
Attach Battery Cover
・Insert studs of Battery Cover
, then press Battery Cover
firmly down .
・Press down firmly at circled locations and check there are
no gaps between Battery Cover and Body.
Removing SD Card
Always perform Unmount SD Card, then power off first.
Lift Battery Cover
・Use slot to lift Battery Cover.
Remove Battery Cover
・Insert finger into gap to remove Battery Cover, without
forcing.
Slide Lock Switch to FREE side
Remove Battery
・Keep pressing Battery
as you lift it .
Remove SD Card
・Push in SD Card and release it; SD Card pops out. Carefully
remove it without bending.