硕飞科技
SHENZHEN SOFI TECHNOLOGY www.sofi-tech.com
User Manual
3
SP16 Series programmer
Chapter 1. Introduction into Products
Performance and characters
⚫
Designed specifically for serial EEPROM / SPI FLASH device, faster and more stable than general-
purpose programmer
⚫
USB power supply and communication, no external power supply required. Small size (size:
103x71x23mm), easy to carry
⚫
Supports a full range of 93/24/25/BR90 memories, supports software upgrades to increase support for
new devices
⚫
Supports detection of 25 series SPI FLASH device models;
⚫
Supports pin contact detection to improve the reliability of programing;
⚫
Supports ISP program. On-board patch devices can be directly connected to be programmed
⚫
Standard 40Pin ZIF socket, applicable to wide/narrow devices and general adapters
⚫
Overcurrent protection function to effectively prevent misplaced or destroyed device
’s effects on the
programmer;
⚫
Programmer has a built-in 32-bit high-speed processor that provides high-speed programming and
precise timing;
⚫
Supports off-line programming without connecting computers. Has a large data memory built-in that can
supports up to 512Mbit device to program off-line
(Note 1)
;
⚫
Mass production programming mode, automatic detection of device placement and start programming
operation;
⚫
ATE interface function that supports automatic programming machine to control
(Note 2)
;
⚫
Supports one computer to connect multiple programmers programming at the same time, one computer
can connect up to 8 programmers
⚫
The buzzer present voice prompt for success or failure
⚫
Programmable voltage design, adjustable from 1.7V to 5.0V, supporting 1.8V/2.5V/3V/3.3V/5V devices;
⚫
Provide device self-test function;
⚫
Support WinXP (SP2), VISTA, Win7/Win8/Win10 (32bit/64bit)
Note 1: Off-line operation is limited to SP16-F, SP16-FX mode; off-line program does not support ISP mode
Note 2: SP16-FX mode only
