Sofarsolar HYD 3000-EP, Руководство пользователя

Страница: 25 / 71

HYD 3K~6K-EP
User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
。
- 20 -
4.3. PV Connection
Procedure :
Step 1 Select the appropriate cable type and specifications according to the
table4-3.Remove cable glands from the positive and negative connectors.( It is
recommended that the positive and negative be distinguished by different colors).
Step 2 Remove the insulation layer with an appropriate length from the
positive and negative power cables by using a wire stripper as show in Fig.
①
.
Step 3 Insert the stripped positive and negative power cables into the positive
and negative metal terminals respectively and crimp them using a clamping tool.
Ensure that the cables are crimped until they cannot be pulled out by force less than
400 N, as shown in Fig.
②③
.
Step 4 Insert crimped power cables into corresponding housings until you
hear a "click" sound. The power cables snap into place.
Step 5 Reinstall cable glands on positive and negative connectors and rotate
them against the insulation covers.
Step 6 Insert the positive and negative connectors into corresponding PV
terminals of the inverter until you hear a "click" sound, as shown in Fig.
⑥
.
To remove the positive and negative connectors from the inverter, insert a
removal wrench into the bayonet and press the wrench with an appropriate strength,
as shown in Fig.
⑦
.
Before removing the positive and negative connectors, ensure that
the DC SWITCH is OFF.
Fig.4-2 Connect PV
1: Positive metal contact
2: Negative metal contact
①
②
3: Positive connector
4: Negative connector
③