4
MODULYS GP Green Power 2.0
range from 25 to 200 kVA - Ref.: IOMMODGPXX05-GB 01
1. SAFETY STANDARDS
This user manual specifies installation and maintenance procedures, technical data and safety instructions for SOCOMEC. For further
information visit the Socomec website: www.socomec.com.
NOTE!
Any work carried out on the equipment must be performed by skilled, qualified technicians.
NOTE!
Before carrying out any operations on the unit read the installation and operating manual carefully. Keep this manual
safe for future reference.
DANGER!
Failure to observe safety standards could result in fatal accidents or serious injury, and damage equipment or the
environment.
CAUTION!
If the unit is found to be damaged externally or internally, or any of the accessories are damaged or missing, contact
SOCOMEC. Do not operate the unit if it has suffered a violent mechanical shock of any kind.
NOTE!
Install the unit in accordance with clearances in order to prevent access to handling devices and guarantee suffi-
cient ventilation (refer to 'Environmental requirements' chapter).
NOTE!
Only use accessories recommended or sold by the manufacturer.
NOTE!
When the equipment is transferred from a cold to a warm place wait approx. two hours before putting the unit into
operation.
NOTE!
When carrying out electrical installation, all standards applicable specified by the IEC, in particular IEC 60364, and
the electricity supplier must be observed. All national standards applicable to batteries must be observed. For
further information refer to ‘Technical specification’ chapter.
WARNING!
Connect the protective earth (PE) conductor before making any other connections.
NOTE!
The installer is responsible for implementing the backfeed protection with the use of AC input line isolation devices
external to the UPS. Refer to ‘Electrical requirements’ chapter.
DANGER! RISK OF ELECTRIC SHOCK!
Before carrying out any operations on the unit (cleaning and maintenance performances, connection of appliances,
etc.) disconnect all power sources.
DANGER! RISK OF ELECTRIC SHOCK!
After disconnecting all power sources wait approx. 5 minutes for the complete discharge of the unit.
NOTE!
The UPS may be powered from an IT distribution system with a neutral conductor.
NOTE!
Any use other than the specified purpose will be considered improper. The manufacturer/supplier shall not be held
responsible for damage resulting from this. Risk and responsibility lies with the system manager.
NOTE! The product you have chosen is designed for commercial and industrial use only. In order to be used for particular critical
applications such as life support systems, medical applications, commercial transportation, nuclear facilities or any other application or
systemwhere product failure is likely to cause substantial harm to people or property, the products may have to be adapted. For such
uses we would advise you to contact SOCOMEC beforehand to confirm the ability of these products to meet the requested level of
safety, performance, reliability and compliance with applicable laws, regulations and specifications.
NOTE!
This is a product for commercial and industrial application – installation restrictions or additional measures may
be needed to prevent disturbances.
