socomec Masterys Green Power, Инструкция по установке и эксплуатации

Страница: 37 / 62

ENGLISH
IOMMASGPXX01-GB_01
37
10-40 kVA
6.1.3.4 “Parameters” menu.
Displays only the configuration parameters set for the UPS.
The messages in this menu are identified by an asterisk in the configurations service menu.
The parameters can only be changed by entering the service / configurations menu.
CURRENT DATA menu
Message Description
SINOTTICO Identifie the size, the phases configuation input and output and the serial number
SN. 0000000000 of the UPS.
FW. X.XX CKS. XXXX
LAN SINOTTICO MAC ADDRESS
Identifie the mac addres of LAN PCB.
XX . XX . XX . XX . XX . XX
FW X.XX
SCHEDA DIGITALE
Identifie the micro prosessor software version.
UP RV 000 CKS: 0000 Identifie the mac addres of LAN PCB.
DSP RV 000 CKS: 0000
MIMIC PANEL
6
An error message is displayed if the code is incorrect. Check that the code displayed corresponds to the one pro-
vided by the Support Centre and repeat the procedure.
SEE INSTALLATION MANUAL
FOR PROCEDURE
CODE = - - - - **
6.1.3.5 “Service” menu.
This is used to change the configuration parameters, insert the warranty activation code and display the service code.
“Activation code” menu.
During activation of the equipment a warranty activation code, made up of four characters, is requested to com-
plete the start-up procedure.
The activation code is provided directly by the reference Support Centre upon communication of the serial number
MANUFACTURER WARRANTY
VALIDATION
PLEASE INSERT THE CODE
of the equipment which is displayed in the next message by pressing ENTER .
Inserting the code does not limit the availability of the equipment’s functionality.
SEE INSTALLATION MANUAL
FOR PROCEDURE
SN: 0000000000
When contact is made with the Support Centre for the activation code, detailed information can be obtained on the
UPS functions available and on the periodic preventive maintenance programmes.
Once the code is obtained, enter it by pressing
ENTER to activate the entry (two asterisks will appear). Select the
first character with the UP and DOWN keys and confirm with ENTER to accept the character. Then move
on to the next character. Pressing the ENTER key after selecting the fourth character activates code.