socomec ATyS d H Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 42

socomec ATyS d H Скачать руководство пользователя страница 15

15

EN

ATyS d H - 544077E - SOCOMEC

5.6.

Assembly of customer mounted accessories

DANGER ! Never handle any customer mounted accessories while there may be the risk of voltage being

or becoming present.

Note: if you are using an external controller different from ATyS 55/65 please note that a delay timer in 0 position

(OFF-OFF) must be established with a minimum time of 1,5 seconds and the order signal from ATS controller to the

ATyS dH must be pulsed signals with pulse duration of at least 200ms. (Recommended pulse length : 300ms).

5.6.1.

ATS Controller for use with the ATyS d H

ATyS C55/C65 are ATS controllers. They ensure the automatic control of remotely operated transfer switching equipment

such as the ATyS r, ATyS S, ATyS d S, ATyS d M and ATyS d H as well as common contactors, circuit breakers or most

other motorised transfer switches.

ATyS C55 General characteristics

• Self-powered from sensing.

• Wide voltage range (88-576VAC).

• 24 VDC aux power supply (for optional use).

• 2 latching relays.

• Smart commissioning wizard.

• IP65 degree of protection with gasket (accessory).

• 1000 Alarms and Events.

• 6 fully configurable I/O.

• Genset scheduler.

• Door or back plate mounting.

• Main/Main, Main/Genset and Genset/Genset applications.

• Easyconfig configuration software.

• RS485 Modbus communication.

• Ethernet, SNMP, BACnet using DIRIS M-70 gateways. Includes

Webserver.

• A DIRIS Digiware D-70 gateway can be utilised as a remote

display for multiple ATyS C55 controllers; the D-70 also provides

Ethernet, SNMP & BACnet connectivity.

ATyS C65 General characteristics

• Self-powered from sensing.

• Wide voltage range (88 - 576 VAC).

• 24 VDC aux power supply (for optional use).

• 2 latching relays.

•

Digiware IO-10: I/O extension up to 30 inputs and 18 outputs.

• Power & Energy metering with /1 A or /5 A current

transformers.

• Energy backup.

• IP65 degree of protection (panel gasket included).

• 3000 Alarms and Events.

• Multiple fully configurable timers, thresholds and I/O.

• Easyconfig configuration software.

• Shock resistant IK08+.

•

Digiware compatible (replaces U module).

• Ethernet, SNMP, BACnet using DIRIS M-70 gateway. Includes

Webserver.

• A DIRIS Digiware D-70 gateway can be used as a remote display

for multiple ATyS C65 controllers; the D-70 also provides Ethernet,

SNMP & BACnet connectivity.

«
...
13
14
15
16
17
...
»

Содержание ATyS d H











































Отзывы:

Нет отзывов