manualshive.com logo in svg

socomec ATI 1000 A, Техническое руководство по эксплуатации

Поделиться
Скачать
socomec ATI 1000 A Скачать руководство пользователя страница 5

SOCOMEC - Réf.: 678 623 G GB

5

ENGL

ISH

Option 9:

• Top Cable Entry. For cables to be

routed through the top rather than
bottom. Option code is TICT.

Option 6:

• Auxiliary contacts for switch posi-

tion information, padlocking and
Auto / Manual mode information are
optionally available. Option code is
TAUX.

INTRODUCTION (continued)

OPTIONS AVAILABILITY

Factory options are delivered pre-installed in the enclosures

Option 5:
• A switch allowing 277 Vac specific

voltage option for customers requi-
ring voltage code V601 (480/277 Vac).
Option code is THVM.

Option 1:
• A metering module allowing standard

fe current and power meter-
ing facilities on a larger backlit display.
This option also integrates option 6
(TAUX). Option code is TMET & TAUX.

Option 7:
• 2IN / 2OUT.1 plug in module allowing

auxiliary contacts for Main and
Generator available information is also
available as an option. Option code is
TIO2.

Option 8:
• 1 plug in communication module,

JBUS / MODBUS protocole, can
optionally be ordered allowing remote
communication of the changeover
system. Option code is TCOM.

Option 2:
• IP54 protection rating is available as

an option. A specific protection win-
dow must be installed on the front
panel of the enclosure to avoid water
infiltration in the enclosure. Option
code is TIP5.

Option 3:
• Solid neutral link is available as an

option on the switch itself, when
switching of the neutral cable is not
required. Option code is TLNK.

Option 4:
• Lightning protection is also available

as an option to avoid ATS damage in
case of a strike on the power cables.
This option is highly recommended
in stormy areas. Option code is TLPR
and TI02 is included.

Loose options are available, for customer mounting in the enclosures

Option 2
IP54 Protection Kit

Option 7
2In / 2Out

Option 3
Solid Neutral

Option 6
Auxiliary contacts

Option 4
Lightning Protection

Option 1
Metering Option

Option 5
Voltage 277 VAC

Option 8
Communication

Option 9
Top Cable Entry

ATI 036 A GB

Содержание ATI 1000 A

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды