12 | CHAPTER 3: WINDOWS CE SETUP
STEP 7: Set up Remote Networking
You will need your completed Network Information Form for this step.
Remote Networking Setup for Pocket PCs
1. Go to
Start | Settings | Connections | Modem
.
2. The
Modem Connections
screen will appear. Tap
New Connection…
3. In the
Make New Connection
screen, enter a name for the connection,
such as “GSM Phone.”
In the
Select a modem
field, select the
Socket DPC GSM Connection
.
Make sure the
Baud Rate
is set to
19200
bps.
Make New Connection screen
4. Tap on
Advanced…
Do NOT change the default settings in
Port Settings
.
•
If using DHCP, you can probably keep the default settings in the
TCP/IP
and
Name Servers
screens. Tap
ok
.
•
If NOT using DHCP, click on the
TCP/IP
and/or
Name Servers
tabs
and follow your Network Information Form to enter any necessary IP
addresses. When done, tap
ok
.
5. When you return to the
Make New Connection
screen, tap
Next
.
6. In the next screen, enter the dial-up number and tap
Next
. Spaces or
dashes are not required within the phone number.
7. In the next screen, uncheck
Wait for dial tone before dialing
. Tap
Finish
.
