SOCATA TB20GT, Руководство пилота

Страница: 71 / 213

SECTION 4
NORMAL PROCEDURES
SOCATA
MODEL TB 20
The content of this document is the property of
socata
. It is supplied in
confidence and commercial security of its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor
may information contained in it be disclosed to unauthorized persons. It must not
be reproduced nor transmitted in any form in whole or in part without permission
in writing from the owners of the Copyright.
Information in this document is subject to change without notice.
© 1988, 1991, 1992, 1994 to 1996, 1997, 2000 -
socata
- All rights reserved
Back to
Contents
June 30, 1988
Revision 7
4.15
Leave icing conditions as soon as possible.
Remember to push in the ”Alternate Air” control after
leaving the icing area and when you are sure there is no ice
on the airframe.
DESCENT
Power setting as required for descent.
Every 1500 ft, apply engine power to prevent excess
engine cooling and spark plugs fouling. Avoid too long
descents with manifold pressure lower than 14 in.Hg.
Seats, seat belts,
shoulder harnesses
ADJUSTED and SECURE
APPROACH – LANDING
FINAL :
Airspeed 86/92 KIAS
Flaps TAKE–OFF below 129 KIAS
Landing gear lever DOWN
Fuel pump ON
Mixture FULL RICH
Propeller FULL FORWARD
Brakes Checked
Seats, seat belts, shoulder harnesses Checked
Landing lights ON
SHORT FINAL :
Flaps LANDING below 103 KIAS
Airspeed See Section 5
” Landing Performance ”
Standard airspeed 73 KIAS
Air conditioning switch (if installed) ”OFF”
GO–AROUND
Smoothly apply full power
Airspeed 76/81 KIAS