SOCATA
MODEL TB 20
SECTION 7
DESCRIPTION
The content of this document is the property of
socata
. It is supplied in
confidence and commercial security of its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor
may information contained in it be disclosed to unauthorized persons. It must not
be reproduced nor transmitted in any form in whole or in part without permission
in writing from the owners of the Copyright.
Information in this document is subject to change without notice.
© 1988, 1991, 1992, 1994 to 1996, 1997, 2000 -
socata
- All rights reserved
June 30, 1988
Revision 8
7.60
Reset after an inadvertent activation
ELT 90 (EUROCAE) – ELT 91 (TSO)
1) Set ELT switch to ”MAN/RESET”
or remote control switch to ”MAN”.
a) The ELT keeps on
transmitting emergency
signal.
b) On remote control, the ”XMIT
ALERT” red warning light
remains on.
c) On ELT, the red warning light
remains on.
2) Set again ELT switch or remote
control switch to ”AUTO”.
a) The ELT does not transmit
emergency signal any longer.
b) On remote control, the ”XMIT
ALERT” red warning light
goes off.
c) On ELT, the red warning light
goes off.
ELT 96 (EUROCAE) – ELT 97 (TSO)
1) Set ELT switch to ”MAN/RESET”,
then to ”AUTO” or press push
button ”AUTO TEST/RESET” on
the remote control.
a) The ELT does not transmit
emergency signal any longer.
b) On remote control and on ELT
switch, the ”XMIT ALERT” red
warning light illuminates
during 2 seconds, then goes
off.
JE2, ELT 10 ET POINTER 3000
On ELT, press on button ”RESET”.