SNR S2940-8G-v2, Руководство по настройке

Страница: 336 / 420

SNR S2940-8G-v2 Switch Configuration Guide
Configuration
2. Configure server
Command Explanation
Global Mode
tacacs-server authentication host <ip-
address> [ port <port-number> ] [
timeout <seconds> ] [ key { 0 | 7 }
<string> ] [primary]
no tacacs-server authentication host
<ip-address> Configure the IP address, listening port number, the
value of timeout timer and the key string of the
server; the no form of this command deletes
the authentication server.
3. Configure the authentication timeout time
Command Explanation
Global Mode
tacacs-server timeout <seconds>
no tacacs-server timeout Configure the authentication timeout for the
server, the 'no tacacs-server timeout' command re-
stores the default configuration.
4. Configure the IP address of the NAS
Command Explanation
Global Mode
tacacs-server nas-ipv4 <ip-address>
no tacacs-server nas-ipv4 To configure the source IP address for the
packets for the switch.
49.3 Scenarios Typical Examples
10.1.1.1
10.1.1.2
TACACS Server
10.1.1.3
Figure 49.1: TACACS Configuration
A computer connects to a switch, of which the IP address is 10.1.1.2 and connected with a
authentication server; IP address of the server is 10.1.1.3 and the authentication port is
defaulted at 49, set telnet log on authentication of the switch as tacacs local, via using
authentication server to achieve telnet user authentication.
336