SNR S2940-8G-v2, Руководство по настройке

Страница: 110 / 420

SNR S2940-8G-v2 Switch Configuration Guide
CFM-OAM Configuration
4. Create MD
Command Explanation
Global mode
ethernet cfm domain < domain-
name > level < level-id >
no
ethernet cfm domain <
domain-name >
Build up MD: enter into the MD configuration mode.
If the MD is created successfully, the level will not be allowed
to modify. No command deletes the created MD.
MD Configuration Mode
id { mac-address XX-XX-XX-
XX-XX-XX
domain-number
< domain-number > | dns <
dns-name > | null }
no id
Configure MDID. Domain-name which is configured by the
name of maintenance domain will use the command of eth-
ernet cfm domain will not be fill in the message. Fill in the
MDID and ma name will create MAID; the total length of
MAID is 44. The length cannot be existed; otherwise, it will
have error. No command deletes the configured id.
5. Create MA
Command Explanation
MD Configuration Mode
service { < ma-name > | number
< ma-num > | pvlan < vlan-id > }
{ port | pvlan < vlan-id > } [vlan <
WORD > ] [direction down]
no service { < ma-name > | num-
ber < ma-num > | pvlan < vlan-id
> } Build up MA. Configure the property of UP/DOWN of MA
and enter into MA mode. One service can related to one
or more vlan. If MA is created successfully, the association
vlan and UP/DOWN property will not be allowed to modify.
If there is need to modify, delete the MA first and create it
again.One switch can configure maximum 512 MA. No com-
mand deletes the created MA.
6. Create MEP
Command Explanation
MA Configuration Mode
mep mepid < WORD >
no mep mepid [ < WORD > ] Using this command to build up the permit configured MEP
table in the maintenance collection. No command deletes
the created MEP.
Port Mode
ethernet cfm mep < mepid > do-
main < domain-name > service
{ < ma-name > | number < ma-
num > | pvlan < vlan-id > }
no ethernet cfm mep < mepid >
domain < domain-name > ser-
vice { < ma-name > | number <
ma-num > | pvlan < vlan-id > ]} Build up MEP on port. The MEP property has been formed
when creating the MA. If MA is UP/DOWN property, all MEP
points in this MA are UP-DOWN property. No command
deletes the created MEP.
110