SNOWJOE 24V-X2-SB15, Руководство оператора

Страница: 10 / 20

10
7. Timely recharging of the batteries will help prolong the
batteries' life. You must recharge the battery packs when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery packs to become
fully discharged as this will cause irreversible damage to the
batteries.
Assembly
Assembling the handles
1. Mount the middle handle frame onto the lower handles
and align the holes. Join the handle frames with 2 sets of
handle knob + square J-bolt as shown (Fig. 5).
2. Fit and secure the upper handle frame onto the middle
handle frame with 2 sets of handle knob + bolt as shown
(Fig. 6).
NOTE: Adjust upper handle assembly to the optimal
position by aligning with the hole at the desired height.
3. Clip the cable in the cable clips located on middle handle
frame.
Discharge Chute Assembly
1. Slide the chute deflector onto the discharge chute, as
shown (Fig. 7).
2. Insert the washers into the middle of the chute
connection, pass the carriage bolts through from the
inside of the chute, and tighten with the deflector knobs
on each side (Figs. 8 – 9).
Fig. 4
Middle handle frame
Fig. 5
Lower handle
Square J-bolt
Handle knob
Fig. 6
Upper handle
frame
Middle handle
frame
Handle knob + bolt
1 2
Fig. 7
Chute deflector
Discharge chute