background image

2

m

WARNING! 

If the snow blower strikes any object, 

 

follow these steps:

  i)   Stop the snow blower. Remove the batteries.
  ii)  Inspect for damage.
 iii) Repair any damage before restarting and operating  

     the snow blower.

Electric Safety

m

WARNING!

 Read all safety warnings and instructions. 

Failure to follow the warnings and instructions may result in 

electric shock, fire and/or serious injury.

1.  Prevent unintentional starting. Ensure the switch is in the 

off-position before connecting with battery packs, picking 

up or carrying the appliance. Carrying the appliance with 

your finger on the switch or energizing appliance that have 

the switch on invites accidents.

2.  Remove the battery packs from the appliance before 

making any adjustments, changing accessories, or storing 

appliance. Such preventive safety measures reduce the 

risk of starting the appliance accidentally.

3. 

Recharge only with the charger specified by the 

manufacturer. A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 

another battery pack.

4. 

Use appliances only with specifically designated battery 

packs. Use of any other battery packs may create a risk of 

injury and fire.

5. 

When battery packs are not in use, keep them away from 

other metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can make a 

connection from one terminal to another. Shorting the 

battery terminals together may cause burns or a fire.

6. 

Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally occurs, 

flush with water. If liquid contacts eyes, additionally seek 

medical help. Liquid ejected from the battery may cause 

irritation or burns. 

7.  Do not use a battery pack or appliance that is damaged 

or modified. Damaged or modified batteries may exhibit 

unpredictable behavior resulting in fire, explosion or risk of 

injury.

8. 

Do not expose a battery pack or appliance to fire or 

excessive temperature. Exposure to fire or temperature 

above 105ºF (40.5ºC) may cause explosion. 

9.  Follow all charging instructions and do not charge the 

battery packs or appliance outside of the temperature 

range specified in the instructions. Charging improperly 

or at temperatures outside of the specified range may 

damage the batteries and increase the risk of fire.

10. 

Have servicing performed by a qualified repair person 

using only identical replacement parts. This will ensure 

that the safety of the product is maintained.

11. Do not modify or attempt to repair the appliance or the 

battery packs except as indicated in the instructions for 

use and care.

Battery & Charger  

Safety Instructions

We pay a great deal of attention to the design of every battery 

pack to ensure that we supply you with batteries that are safe, 

durable and have a high energy density. The battery cells have 

a wide range of safety devices. Each individual cell is initially 

formatted and its electrical characteristic curves are recorded. 

This data is then used exclusively to be able to assemble the 

best possible battery packs.

Despite all the safety precautions, caution must always be 

exercised when handling batteries. The following points must 

be obeyed at all times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. Incorrect handling 

of the battery packs can cause cell damage.
IMPORTANT!

 Analyses confirm that incorrect use and poor 

care of high-performance batteries are the main factors 

responsible for personal and/or product damage.

m

WARNING!

 Read all safety warnings and instructions. 

Failure to follow the warnings and instructions may result in 

electric shock, fire and/or serious injury.

m

WARNING!

 

Use appliances only with specifically 

designated battery packs (see page 17 for all specifically 

designated battery packs). Unauthorized battery packs may 

create a risk of injury and fire.

m

CAUTION!

 To reduce the risk of injury, charge the

iON+ 24V lithium-ion battery packs only in the designated

iON+ 24V lithium-ion charger. Other types of chargers present

risk of fire, personal injury and damage. Do not wire a battery

pack to a power supply plug or car cigarette lighter. Such

misuse will permanently disable or damage the battery packs.

• 

Avoid dangerous environments – Do not charge the 

battery packs in rain, snow or in damp or wet locations. 

Do not use the battery packs or charger in the presence of 

explosive atmospheres (gaseous fumes, dust or flammable 

materials) because sparks may be generated when inserting 

or removing the battery packs, which could lead to a fire.

• 

Charge in a well-ventilated area – Do not block the 

charger vents. Keep them clear to allow for proper 

ventilation. Do not allow smoking or open flames near a 

charging battery pack. Vented gases may explode.

  NOTE: The safe temperature range for the batteries is 41°F 

– 105ºF (5°C – 40.5°C). Do not charge the batteries outside 

in freezing weather; charge them at room temperature.

• 

Maintain charger cord –

 When unplugging the charger, pull 

the plug, not the cord, from the receptacle to reduce the 

risk of damage to the electrical plug and cord. Never carry 

the charger by its cord or yank it by the cord to disconnect 

Содержание 24V-X2-SB15





















Отзывы: