background image

english

Assembly & Operating Manual

SRD20 - Snow Rake Deluxe

ASSEMBLY INSTRUCTIONS: 
 

a.  Attach one snow rake pole (3) to the snow rake head (2) by pushing the silver snap button on the  

 

 

pole and putting the pole in the large hole in the snow rake head (3). The silver button should lock  

  into 

place. 

 

b.  Attach the other four poles by pushing in silver button on pole & fitting into the end of another pole  

 

 

until it lock in place.

 

c.  Attach Vinyl end grip (4) onto end of last pole (this should be a snug fit)

For best results use on fresh snow – to help prevent Ice Dams.

Operating Instructions:
 

a.  Place the rake head with poles attached approximately 1 ft. up on roof, pull down the snow, repeat  

 

 

this process 1 ft. at a time. 

*(If resistance occurs, STOP, Readjust & repeat process)* 

WARNING! Keep away from electrical wires.  ** THIS PRODUCT DOES NOT REMOVE ICE DAMS **

US/Canada: Visit 

www.avalanche-snow.com

 Europe: Visit 

www.avalanche-snow.eu

 for Parts & Accessories for 

your Avalanche!

Limited Warranty: 

Avalanche Manufacturing warrants this equipment to be free from defects in material and workmanship under normal 

use. *THIS PRODUCT DOES NOT REMOVE ICE DAMS* This warranty is extended to the original purchaser for a 

period of 6 months from the date of purchase and is applicable only when the equipment is assembled and operated 

in accordance with factory recommendations. The warranty does not extend to damage or wear caused by misuse, 

abrasion, corrosion, negligence, accident, faulty assembly or tampering in a manner to impair its normal operation. 
Return Policy:

All returns must be made within 30 days from the date of purchase. There is a 15% restocking fee that will be applied 

to ALL orders unless covered by our warranty listed above. No freight charges will be refunded.
Return Procedure: 

Requests for a return must be authorized through Avalanche prior to returning merchandise. Please call our toll free 

number 1-800-378-3088 for a return authorization number.

Avalanche! Products by Rhino Manufacturing, Inc.

US/Canada: Toll Free: 800-378-3088  

Email: [email protected]\Web: www.avalanche-snow.com 

Europe: 011 47 930 59 734 Website: www.avalanche-snow.eu

Avalanche ! Produits par Rhino Manufacturing, Inc.

US/Canada: Appel gratuit : 800-378-3088  

E-mail : [email protected]\Web: www.avalanche-snow.com 

Europe: 011 47 930 59 734 Site Web: www.avalanche-snow.eu

Avalanche! Produkte von Rhino Manufacturing, Inc.

USA/Kanada: Gebührenfrei: 800-378-3088  

E-Mail: [email protected]\Web: www.avalanche-snow.com 

Europa: 011 47 930 59 734 Webseite: www.avalanche-snow.eu

Avalanche! - Produkter av Rhino Manufacturing, Inc.

US/Canada og Tollfri: 800-378-3088

E-post: [email protected] / Nettside: www.avalanche-snow.com

Europa: 011 47 930 59 734 Nettside: www.avalanche-snow.eu

DISASSEMBLE & STORAGE:
 

a.  Take all poles apart

 

b.  Snap poles into black bracket (1) (with storage clip facing upward)

 

c.  Snap rake head onto black brackets storage clip (see figure 1.) 

           ITEM                            PART #                                     NAME                                                               QTY 

SR-BRKT 

Snow Rake Storage Bracket 

SR-HD 

Snow Rake Head 

SR-HE 

Snow Rake Handle Extensions 

SR-VEG 

Snow Rake Vinyl End Grip 

SR-WK 

Snow Rake Wheel Kit (2 Wheels) 

1 kit = 2 

 

 

Hanging Holes for Compact Storage

 4 

 3 

 1 

SnowRake! Pro 16 & Deluxe 20

Warranty

All Avalanche! and SnowRake! products are warranted for 30 days from purchase.  
Products are warranted against manufacturer defects only.  If you need to return a product please call Avalanche 
for a RMA (Return Merchandise Authorization) number prior to shipping.  1-800-378-3088

SnowRake! Pro 16 & Deluxe 20 

Owner’s Manual

Assembly:

1.  Place the snow rake (as is from box) on a flat surface. Make sure to place it horizontally—left to 

right—in front of you so the writing on the snow rake head (SR-HD) is legible. 

To Remove Snow Rake Head (SR-HD):

2.  Take your dominant hand and grab the middle-top of the snow rake head (SR-HD) where it attaches to 

the black storage bracket (SR-BRKT). Tilt the top of the snow rake toward your body slightly—about 90 

degrees.

3.  With your less dominant hand, push against the snow rake poles (SR-HE) and bracket (SR-BRKT) in the 

center behind the rake head (SR-HD). At the same time pull—with your dominant hand—the snow rake 

head toward your body. 

To Finish Assembly of Rake:

4.  Pull the snow rake poles (SR-HE) out of the storage bracket (SR-BRKT) one by one. 

5.  Attach one snow rake pole (SR-HE) to the snow rake head (SR-HD) by pushing the silver button on the 

pole and putting the pole in the large hole in snow rake head (SR-HD).  The silver button should lock into 

place. 

6.  Attach other poles together by pushing silver button on pole and fitting into end of another pole until 

it locks into place. 

7.  When completed, take the black Vinyl End Grip (SR-VEG) and push onto end of last pole (*note: this 

should be a snug fit). 

For best results use on fresh snow

 2 

 5 

Index 

File 

Name 

 Part 

Name 

  Qty.

SR-BRKT   

Snow Rake Storage Bracket 

1

SR-HD 

 

Snow Rake Head 

 

1

SR-HE 

 

Snow Rake Handle Extension 

(5 with Deluxe 20)

SR-VEG 

 

Snow Rake Vinyl End Grip 

1

SR-WK 

 

Snow Rake Wheel Kit  

(Deluxe 20 only)

5th pole 

for D

elux

e 20

RETURN POLICY:
All returns must be made within 30 days from the date of purchase.  There is a 15% restocking fee 
that will be applied to ALL orders unless covered by our warranty listed above.
No freight charges will be refunded

Отзывы: