SnowEx HELIXX, Руководство пользователя

Страница: 18 / 36

Lit. No. 31022EN, Rev. 00 18 June 1, 2022
MOUNTING THE SPREADER
Construct Sill Spacer
Measure the distance from the front end of the hopper
sill to the front of the vehicle bed and make a spacer
from 2" x 8" lumber to fit that area.
Failure to install a spacer could result in damage
to the spreader.
Install Tie-Down Straps
NOTE: Periodically throughout the snow and ice
control season, verify that mounting devices
are secure.
Install tie-down straps from the tie-down loops on the
spreader body to the vehicle frame as shown. Use
one strap per loop, pulling diagonally away from the
hopper body.
WARNING
Spreader shall be bolted to vehicle frame.
Do not rely on the tie-down chains or straps
alone to hold spreader in vehicle.
Ratchet
Strap
Assembly
15°
Minimum
Vehicle
Tie Down
or Eyebolt
Fit to vehicle.
Measured
distance.
18"
(46 cm)
Front of
Vehicle Bed
Measure distance.
Trough
End Cap
Spacer
Built to Fit