manualshive.com logo in svg

Snorkel S3215E, Руководство оператора, Страница: 67 / 90

Поделиться
Скачать
Snorkel S3215E Скачать руководство пользователя страница 67

S3215L/S3215E/S3219E/S3220E/S3226E/S4726E/S4732E – 1500834 

59

 

If the main hydraulic system fails: 

 

y

The aerial platform may be lowered using the emer-
gency lowering lever. 

 

y

The machine may be towed if the drive system fails. 

 

y

Refer to Emergency Lowering, or Towing for the ap-
propriate procedure.

Emergency Lowering

Use the following procedure to operate the emergency 
lowering system.

Warning

The potential for an accident increases when safety 

devices do not function properly. Death or serious 

injury could result from such accidents. Immediately 

push the emergency stop button inward to disable the 

control system before using the emergency lowering 

system in the event of an emergency.

  1.  Immediately push the emergency stop button inward 

to disable the control system in the event of an emer-
gency.

  2.  Retract the platform extension, if possible.

  3.  Locate the emergency lowering control.

The lever for the S3215L/S3215E/S3219E is mounted 

at the front of the aerial platform (refer to Figure 11.1).

Figure 11.1 – Front of Machine

Chapter 11 – Emergency Operation

The handle for the S3220E/S3226E/S4726E/S4732E 
is mounted at the rear of the aerial platform (refer to 
Figure11.2).

Figure 11.2 – Rear of Machine

Danger

Pinch points may exist between moving components. 

Death or serious injury will result from becoming 

trapped between components. Make sure all person

-

nel stand clear while lowering the platform with the 
emergency lowering system.

  4.  Make sure there is nothing in the way to obstruct the 

platform when it lowers. 

  5.  Stand clear of the scissors structure.

 

y

S3215L/S3215E/S3219E  –  push  down

-

ward on the emergency lowering lever at the 
front of the machine to lower the platform. 

 

y

S3220E/S3226E/S4726E/S4732E – pull outward 
on the emergency lowering handle at the rear of 
the machine to lower the platform.

  6.  The platform will begin to lower as the lever/handle 

is actuated. Release the lever/handle to stop the 
platform from lowering.

Warning

The potential for an accident increases when safety 

devices do not function properly. Death or serious 

injury could result from such accidents. Fully close 

the emergency lowering valve before operating the 

aerial platform. 

  7.  Make certain the lever is fully released and the emer-

gency lowering valve is fully closed before operating 
the aerial platform.

Towing

The aerial platform may be pushed or pulled after properly 
stow the aerial platform and disengaging the brakes. Use 
the following procedure to manually disengage the brakes.

Emergency 

Lowering Lever

Emergency Lowering Handle

Содержание S3215E



























































































Отзывы:

Нет отзывов