Snorkel S3215E, Руководство оператора, Страница: 58 / 90

Chapter 9 – Operation
50
S3215L/S3215E/S3219E/S3220E/S3226E/S4726E/S4732E – 1500834
y
The hydraulic tray on the left side of the chassis con-
tains the hydraulic pump, reservoir and fluid filter.
Danger
The aerial platform can tip over if it becomes unsta
-
ble. Death or serious injury will result from a tip-over
accident. Do not open the trays when the platform is
raised more than 8
′
(2.4 m).
y
To open a tray, pull upward on the latch and swing
the tray open.
y
The latched tray must be opened first, before the bat
-
tery tray can be opened.
y
When closing the trays, close the battery tray first. The
latched tray holds both trays in the closed position.
Electrical Power Outlet
The electrical power outlet has two, 3-prong, 125 volt AC
electrical connectors (refer to Figure 9.6).
Figure 9.6 – Electrical Power Outlet
Power is supplied to the outlet by connecting an external
power source to the power-input connector at the rear of
the chassis (refer to Figure 9.7).
Figure 9.7 – Rear of Chassis
To use the outlet, plug a source of power into the pow-
er-input connector. Unplug the source of power before
moving the aerial platform.
Pipe Rack
Some machines may be equipped with an optional pipe
rack mounted to the top rail on the left side of the machine.
The pipe rack is available on the following models:
y
S3215E
y
S3219E
y
S4726E
y
S4732E
The pipe rack consists of a pair of supports, one at the front
and one at the rear of the platform (refer to Figure 9.8).
Figure 9.8 – Pipe Rack
The platform rated work load is the total weight of the per-
sonnel and equipment that may be lifted in the platform.
The work load is stated on the platform rating placard
mounted on the toeboard at the front of the platform and
on the pipe rack decal at the rear of the platform.
Danger
The aerial platform can tip over if it becomes unstable.
Death or serious injury will result from a tipover acci
-
dent. Do not exceed the capacity values indicated on
the platform rating placard and on the pipe rack decal.
Capacity values indicate the rated lifting capacity and do
not indicate aerial platform stability.
The operator bears ultimate responsibility for ensuring
that the aerial platform is properly set up for the particular
condition encountered.
The load carried in the pipe rack reduces the platform
capacity by the weight of the load being carried.
Use the following procedure to load the pipe rack.
1. At the front and rear, press on the latch lever to re-
lease the latch and unfasten the straps.
Power-Input Connector
Latch
Strap
Rear
Support
Front
Support