Snorkel S2646, Руководство пользователя

Страница: 224 / 236

- 6
–
Charging State & LED Display
50% 75% 100%
LED
Charging State
0 to 50% charged Blinking Off Off
50% to 75% charged On Blinking Off
75% to 100% charged On On Blinking
100% charged On On On
See Troubleshooting Off Off Blinking
Technical Operation Summary – The charger is an advanced, microprocessor controlled, high
frequency switching type charger. From 0% to 75% a constant current is provided to the battery
(bulk charging) until a pre-set battery voltage is reached. From 75% to 100% a constant voltage
is maintained and the charging current decreases (absorption charging). When the charging
current falls below 2 to 3A charging is complete. The charging curve is temperature
compensated using the starting temperature of the charger as the battery temperature. The
charger will work even with batteries in a severe discharge state with terminal voltages as low
as 2V and there is no need to ‘boost charge” weak batteries before charging. The charger has
an 18 hour timer in case charging can not be completed due to battery problems – see
troubleshooting section. The charger senses and flashes error codes for problems – see
troubleshooting section.