Snell MV-16 Скачать руководство пользователя страница 22

Страница: 22 / 92

MV-16 Multiviewer

www.snellgroup.com

Operation

Issue 1 Rev 12

Page 22

3.3.2.1

Module Menu

The Module Menu (Fig 14.) allows a module's global settings to be configured.

Fig 14. Module Menu.

Auto update

Automatically update tile layout to the display output and preview
every time it is changed in the edit workspace.

Update Layout

Transfer edit workspace layout to display output and preview.

Get Layout

Transfer the current display layout to the edit workspace.

Setup Module

Opens the Module Properties dialog of the currently selected tile
object.

Setup Source

Opens the Source Properties dialog of the currently selected tile
object.

Setup Remotes

Not Used

Set Time

Opens the Set Time dialogue to adjust the clock and date
settings.See section 3.6.

Halt, Reboot, Reset
Module

Maintenance items for shutting down, rebooting the system, or
resetting input/output cards. The task that each of these execute is:

•

Halting the module guarantees that any files that have not
been saved yet, such as layout ones, will get saved before
powering off the frame. This stops the system from running.
The only way to restart it is to power off - power on again.

•

Rebooting the module will shut the system down and start it
back up again. This can take up to 70 seconds.

•

Resetting the module leaves the CPU running, but resets and
reloads the firmware into all the input/output cards.

Table 8.

Module Menu Items.

Note:

The error message, Selected object has no source, will appear if the current object is not
an audio or video object.

Содержание MV-16





























































































Результаты поиска

Содержание MV-16

Отзывы:

Бренды по названию

Популярные бренды

Snell MV-16, Руководство пользователя

Результаты поиска

Содержание MV-16

Отзывы:

Бренды по названию

Популярные бренды