manualshive.com logo in svg

Snell MV-16, Руководство пользователя

Поделиться
Скачать
Snell MV-16 Скачать руководство пользователя страница 12

MV-16 Multiviewer

www.snellgroup.com

Installation

Issue 1 Rev 12

Page 12

© 2013 Snell Limited

2.3 Connector I/O

The MV-16 uses coaxial BNCs for the video inputs, LTC and sync inputs. Micro cross 
connectors are fitted for the two DVI-I inputs and one output. The GPI I/O connector is a high 
density 26 way female 'D' connector. External audio connections (input or output) are via a 
pair of female 37 way 'D' connectors, with audio monitoring outputs on a male 25 way 'D' 
connector. The serial port comprises a 9 way female 'D' connector. A standard RJ45 
connector is provided for LAN connection and a USB connector on the front panel is provided 
for connecting a keyboard. (A pack of mating 'D' type connectors is supplied with the unit).

2.4 Input card configurations

The MV-16 may be fitted with up to four MV-VIP1 or MV-VIP2 video input cards, or any 
combination of the two types. Additionally, an external analogue or digital audio I/O card may 
be fitted to a dedicated card slot as an option.

MV-VIP1 video cards support the following standards:

•

Composite video PAL/NTSC, CVBS - 1Vpp

•

SDI - SMPTE 259M

•

DVI-I - digital or analogue component, 1920 x 1080

•

S-Video (Y/C)

•

Component video RGB/YUV

The MV-VIP2 video card supports HD-SDI up to SMPTE 292M 3G, in addition to the 
standards supported by the MV-VIP1 card. 

The controller card is always fitted in the top left slot and the Analogue/Digital audio card is 
always fitted in the bottom left slot. Video input cards are installed in the remaining slots as 
shown Fig 7.

Fig 5.

MV-16 1U frame rear connector Input/Output. 

Fig 6.

MV-16 1U frame with front panel removed. 

Fig 7.

MV-16 1U frame card slot positions. 

Important:

The card retaining strip that is accessible behind the front panel of the unit must first be 
re-moved before cards can be fitted or extracted. The I/O cards are not hot-swappable and 
the multiviewer must be powered down when inserting and removing cards.

Содержание MV-16





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды