manualshive.com logo in svg

Snell MV-16, Руководство пользователя

Поделиться
Скачать
Snell MV-16 Скачать руководство пользователя страница 17

MV-16 Multiviewer

www.snellgroup.com

Operation

Issue 1 Rev 12

Page 17

© 2013 Snell Limited

3.

Operation

The front panel user interface comprises a power switch, 6 buttons for configuring the unit, 10 
illuminated pre-set configuration buttons, a USB-2 interface and LED indicators for status 
reporting. 

The P1 and P2 LED light green to indicate healthy power supplies. If the red F LED is lit after 
the unit has booted, failure of one or more ventilation fans has been detected. Under normal 
circumstances, the boot cycle takes about 70 seconds.

The MV-16 can be configured and controlled via the LAN, using browser software operating 
on a remote PC.

3.1 Local Operating Modes

At the front panel, normal or 'locked' is the normal operating mode. A special configuration or 
'menu' mode is provided to allow initial IP address configuration for LAN control via a browser. 
The currently set IP address will appear to the top left of the display output during the boot 
cycle.

3.1.1 Normal Mode

In normal use, the configuration menu will be locked to prevent inadvertent operation and 
configuration menus are not available. 

In this mode, the 10 illuminated pre-set configuration buttons are active. A currently displayed 
configuration can be stored by holding down the desired pre-set button for more than 3 
seconds.

Stored presets are recalled by briefly pressing the desired pre-set button, which will 
illuminate.

Fig 10. The 1U MV-16 frame Front Panel. 

Note:

Should the frame lose power, it will restore the last known configuration settings on reboot 
and automatically reflect these in the browser.

Содержание MV-16





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды