NRS70 Series
SECTION 4
NRS70OPS
070803 Version 1 Issue 2
www.snellwilcox.com
4.13
Y GAIN (Luminance Gain)
Pressing this button will reveal a numerical readout
display for the gain of the luminance signal.
By rotating the spinwheel the gain may be adjusted
by ±3 dB in steps of 0.1 dB.
Luminance Gain
0.0 dB
Luminance Gain
Selecting Preset returns the setting to the
calibrated value of 0.
BLACK LEVEL
This selection reveals a numerical readout display
for the Y pedestal or black level.
By rotating the spinwheel the pedestal may be
adjusted by ±100 mV in steps of 1 mV.
Black Level
0 mV
Preset
Black Level
Selecting Preset returns the setting to the
calibrated value of 0.
C GAIN (Chrominance Gain)
Pressing this button will reveal a numerical readout
display for the gain of the chrominance signal.
By rotating the spinwheel the gain may be adjusted
by ±3 dB in steps of 0.1 dB.
Chroma Gain
0.0 dB
Preset
Chroma Gain
Selecting Preset returns the setting to the
calibrated value of 0.
HUE
Pressing this button will reveal a numerical readout
display for the Hue of NTSC signals. By using the
scroll bar the Hue may be adjusted by ±30 ° in
steps of 1°.
NTSC Hue
0 deg
Preset
NTSC Hue
Selecting Preset returns the setting to the
calibrated value of 0°.
Note that if the Proc Amp is enabled and settings
are not at their preset values the text
UnCal
will be
in the default display.