Snell & Wilcox NRS70 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 77

background image

NRS70 Series

SECTION 5

NRS70OPS

070803 Version 1 Issue 2

www.snellwilcox.com

5.5

Software Installation

Run SETUP.EXE from the installation diskette to install the suite of Rollcall programs. Product code IQSPCR
contains  the  Rollcall  Remote  Control  (rollcall.exe)  and  communications  driver  (commtrol.exe)  programs.
Product  code  IQSPCD  contains  the  Rollcall  Remote  Control  (rollcall.exe),  communications  driver
(commtrol.exe), logserver (rolllog.exe) and logviewer (rollview.exe) programs.
On  startup,  the  setup  program  prompts  for  an  installation  directory.  The  default  installation  directory  is
C:\ROLLCALL. The set-up procedure will copy all the necessary files to this directory. Set-up will also create a
Windows Group called RollCall.
Depending on the product code of the diskette, Either two icons (RollCall and Commtrol for IQSPCR) or four
icons (RollCall, Commtrol, LogServer and LogViewer for IQSPCD) will appear in the group.

Overview

ROLLCALL.EXE:
This program allows control of RollCall compatible units. (IQ Modules, Supervisor, other S&W units with
RollCall gateway). Each unit has a ‘control template’ window for control of that device. The user can configure
the program for USER, ENGINEER or SUPERVISOR access levels with password protection. It can install
“template” files from new units automatically or by user request.

ROLLLOG.EXE:
This is the Log Server application that collects logging information from units on the network. Keeps a running
log file of every event received. Writes a current status file for configured units and allows the LogViewer
program to display the information.

ROLLVIEW.EXE:
This program displays the current status file written by ROLLLOG.EXE in a tabulated form. Coloured
conditions highlight warning and failure states. Can be configured for network access for remote monitoring
using share information from the LogServer program.

COMMTROL.EXE:
This program is called automatically by ROLLCALL.EXE or ROLLLOG.EXE and normally runs minimized.
Usually, there is no need to run this program by itself. This program provides the basic communications with
the PC card, serial comms ports or TCP/IP protocols. It also has monitoring facilities for data analysis.

For more details see the operator’s manual for the IQSPCR Section 3

«
...
71
72
73
74
75
...
»

Содержание NRS70














































































Отзывы:

Нет отзывов

Похожие инструкции для NRS70

Бренд: Fein Страницы: 248

Бренд: ZF Страницы: 30

Бренд: Raymarine Страницы: 111

Бренд: Walker Bay Страницы: 8

Бренд: Haigh Страницы: 60

Бренд: HALDER Страницы: 2

Бренд: Hakko Electronics Страницы: 16

Бренд: IDEAL Networks Страницы: 10

Бренд: Ofa Bamberg Страницы: 80

Бренд: Parkside Страницы: 58

Бренд: XFit Страницы: 16

BlackBox Series

Бренд: Nakamichi Страницы: 23

Бренд: Harken Страницы: 4

Бренд: A&D Страницы: 33

Бренд: uniprox Страницы: 3

Бренд: Qlight Страницы: 4

INTRAmatic 31 ES

Бренд: KaVo Страницы: 52

Бренд: Veit Brisay Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды