Snell & Wilcox NRS70 Скачать руководство пользователя страница 7

Страница: 7 / 77

NRS70 Series

SECTION 0

NRS70OPS

070803 Version 1 Issue 2 www.snellwilcox.com

0.7

About this Manual

This manual covers the following products:

•

NRS70 and NRS70TX

Digital Noise Reducers

Packing List

The unit is supplied in a dedicated packing carton provided by the manufacturer and should not be accepted if

delivered in inferior or unauthorised materials. Carefully unpack the carton and check for any shipping damage

or shortages.

Any shortages or damage should be reported to the supplier immediately.

Enclosures:

•

NRS70 unit

•

Power cable.

•

This Operator's Manual

•

Balanced (25 way D) I/O audio rear panel

Software Version Amendments

Notes about Versions Fitted

Software

The NRS70/NRS70TX is shipped with Version 6.6. . 8 of the software.

Manufacturers Notice

allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from

the software programs which are displayed on the screen such as icons, screen display looks etc.

Reproduction or disassembly of embedded computer programs or algorithms prohibited.

Copyrighted names:

Microsoft Windows™

Information in this manual and software are subject to change without notice and does not represent a

commitment on the part of Snell & Wilcox Ltd. The software described in this manual is furnished under a

licence agreement and may not be reproduced or copied in any manner without prior agreement with Snell &

Wilcox Ltd. or their authorised agents.

Содержание NRS70














































































Результаты поиска

Содержание NRS70

Отзывы:

Похожие инструкции для NRS70

Бренды по названию

Популярные бренды

Snell & Wilcox NRS70, Руководство оператора

Результаты поиска

Содержание NRS70

Отзывы:

Похожие инструкции для NRS70

Бренды по названию

Популярные бренды