IQMUX32
Controlling the IQMUX32 from the RollCall Control Panel
Issue 2 Rev 4
Page 21
© 2015 SAM
5.4 Embedder 1 to Embedder 4
Each of the two processing channels of the module has four embedder groups. Each
embedder group comprises two stereo audio pairs, each of which has a left and right channel.
The settings on these screens enable you to:
•
Enable or disable the embedder group.
•
Apply a mute to a pair within the group.
•
Configure each pair as either 2 Channel, Stereo, or Non-PCM.
•
Configure each channel within the pair.
•
Specify the route for each channel.
With the exception of the Embedder Enable control, each control is duplicated for Pair 1 and
Pair 2.
5.4.1 Embedder N Enable
This option, when checked, enables the embedder group.
Note:
The control templates for Embedder 1 to Embedder 4 comprise the same controls. To
avoid repetition, in this manual, the controls are only described once.
