IQMUX32
Controlling the IQMUX32 from the RollCall Control Panel
Issue 2 Rev 4
Page 28
© 2015 SAM
5.9 Memories
The
Memories
screen enables up to 16 setups to be saved and recalled later.
Default memory names can be changed to provide more meaningful descriptions.
5.9.1 Recall Memory
This column lists the settings that have been previously saved. If no settings have been
saved,
None Selected
is displayed.
To recall the settings saved in a memory:
In the
Recall Memory
column, select the memory to recall by clicking on it. The recalled
settings will be applied and the memory name will appear in the
Last Recalled Memory
section.
5.9.2 Save Memory
This column lists the 16 pre-set memory names that are available for use.
To save settings:
In the
Save Memory
column, select a memory location, and then click
Save
. The current
settings are saved and the memory appears in the
Recall Memory
column.
5.9.3 Last Recalled
The
Last Recalled
pane
displays the most recently recalled memory. If any of the settings
have been changed since it was recalled,
an asterisk will be displayed after the memory name.
Note:
User memories do not recall log field states. I.e., whether a log value has been enabled or
disabled.