Snapper 360Z Zero Turn Rider, Руководство оператора

Страница: 27 / 92

Not
for
Reproduction
27
en
1. Place the lawn tractor on a smooth level surface.
2. Attach the quick disconnect (
A , Figure 23) to garden
hose ( B ) and connect to washout port ( C ) on mower
deck.
3. Run water to remove grass and debris from underside
of mower deck.
4. Turn the mower on and place in the highest cutting posi-
tion.
5. Turn the mower off.
6. Remove the garden hose and quick disconnect from
the washout port when completed.
D
C
A
B
Figure 22
Figure 23
C
B
A
Washing the Mower Deck
NOTE: The washout port allows you to connect a typical
garden hose to the left-hand side of the mower deck to
remove grass and debris from the underside.
WARNING
Before running the mower, make sure the hose is
properly connected and does not come into con-
tact with the blades. When the mower is running
and the blades are engaged, the person cleaning
the mower deck must be in the operator position, and
there are no bystanders. Failure to follow these precau-
tions may result in serious injury or death.
Cleaning Debris from the Rider, Mower
Deck and Engine Compartment
1. Clean dirt and debris from the rider and mower deck.
NOTE: Some mower decks feature a washout port.
See Washing the Mower Deck .
2. Clean any debris buildup in the engine compartment
and from on or around the engine.
WARNING
Fire Hazard
Yard debris is combustable.
• Clean dirt and debris from the rider and
mower deck.
• Clean build-up from around the engine.