Snap-On Vantage Ultra Скачать руководство пользователя | Manualshive

Страница: 2 / 127

background image

i

Legal Information

Trademarks

Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. This
publication contains many Snap-on Incorporated trademarks, including but not limited to Snap-on, SureTrack and
ShopStream. All other marks are trademarks or registered trademarks of their respective holders.

Copyright Information

© 2018 Snap-on Incorporated. All rights reserved.

Disclaimer of Warranties and Limitation of Liabilities

All pictures and illustrations shown are for reference purposes only. All information, specifications and illustrations in
this manual are based on the latest information available at the time of printing and are subject to change without
notice. While the authors have taken due care in the preparation of this manual, nothing contained herein:

•

Modifies or alters in any way the standard terms and conditions of the purchase, lease, or rental agreement
under the terms of which the equipment to which this manual relates was acquired.

•

Increases in any way the liability to the customer or to third parties.

Snap-on

®

reserves the right to make changes at any time without notice.

IMPORTANT:

Before operating or maintaining this unit, please read this manual carefully paying extra attention to the safety
warnings and precautions.

Software License Information

Use of Software is governed by the terms and conditions of the End User License Agreement. The diagnostic tool
should not be initially operated until the End User License Agreement is read. Use of the device acknowledges your
acceptance of the End User License Agreement. The Snap-on Incorporated Software End User License Agreement
may be provided with the diagnostic tool, and is available at:

https://eula.snapon.com/diagnostics

.

Patent Information

For a listing of Snap-on products that are protected by patents in the United States and elsewhere,
visit:

https://patents.snapon.com

User Manual Information

This manual includes information and images applicable with diagnostic software version 18.4 and later. Some
information within this manual may not be applicable with other diagnostic software versions.

The information in this manual is periodically revised to ensure the latest information is included. The current version
of this manual and other technical documentation is available online from Snap-on Diagnostics.

«
1
2
3
4
...
»

Содержание Vantage Ultra
































































































































Отзывы:

Нет отзывов

Похожие инструкции для Vantage Ultra

Бренд: Witt Страницы: 11

Бренд: 7invensun Страницы: 15

KS-Mobil Easy 120l

Бренд: CEMO Страницы: 112

Kapriol SP series

Бренд: Sirmex Страницы: 27

5320 Xpress Music

Бренд: Nokia Страницы: 21

Бренд: Westin Страницы: 5

Бренд: Dwyer Instruments Страницы: 2

Бренд: Warn Страницы: 14

Бренд: Laser Страницы: 4

Бренд: Micro Matic Страницы: 24

Бренд: Graf Страницы: 40

Бренд: ComAp Страницы: 105

STRUCTURAL PORCH POST

Бренд: CertainTeed Страницы: 2

Бренд: Hi-Target Страницы: 24

Бренд: Acer Страницы: 68

Бренд: Saddlemen Страницы: 5

Бренд: Nilfisk-Advance Страницы: 2

Lifestyle Manager

Бренд: Xavix Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды