6
Chapter 2
Introduction
The Vantage
®
Ultra is a multi-function two-channel lab scope, graphing multimeter, and the
exclusive Snap-on Guided Component Test database combined into a single hand-held
Diagnostic Tool.
This chapter introduces the basic features of the Diagnostic Tool, including the control buttons,
meter connections, battery pack, and power sources. Technical Specifications are provided at the
end of this chapter.
2.1 Control Buttons
There are four “push type” control buttons and one “thumb pad rocker type” multi-directional
button located on the right side of the Diagnostic Tool. All other Diagnostic Tool operations are
controlled through the touch screen.
Figure 2-1
Front view
Item
Button
Description
1
N/X
or Cancel
- Push
type button
•
To exit a menu or program.
•
To close an open list and return to the previous
menu or screen.
•
To answer “No” when a yes/no choice is given.
2
Y/
a
or Accept
- Push
type button
•
To confirm a selection from a menu or program
•
To select an item that was highlighted using the
direction arrows.
•
To advance to the next screen in a series.
•
To answer “Yes” when a yes or no choice is
given.
