Snap-On Dual 3412, Руководство пользователя

Страница: 13 / 52

V
S Saaffeettyy IInnffoorrm maattiioonn
A test vehicle may move if not properly prepared.
• Block the drive wheels before performing a test
with the engine running. Unless instructed
otherwise, set the parking brake and put the gear
selector in neutral (manual transmission) or park
(automatic transmission). If the vehicle has an
automatic parking brake release, disconnect the
release mechanism for testing and reconnect
when testing is completed.
• Do not leave a running engine unattended.
A moving vehicle can cause injury.
Risk of injury.
This equipment should be operated by qualified
personnel.
Operation of D Duuaall 33441122 by anyone other than
qualified personnel may result in injury.
Hose couplings are not self closing.
Always close the valves on the gauge set before
disconnecting a hose.
Loosened hose couplings can leak refrigerant to the
atmosphere.
Misdiagnosis may lead to incorrect or improper repair
and/or adjustment.
Do not rely on erratic, questionable, or obviously
erroneous test information or results. If test
information or results are erratic, questionable, or
obviously erroneous, make sure that all connections
are correct and that the test procedure was
performed correctly. Refer also to the
Maintenance/Troubleshooting section and perform
tests and make repairs as required. If test
information or results are still suspicious, do not
use them for diagnosis. Contact your S Snnaapp--oonn//S Suunn
Representative.
Improper repair and/or adjustment may cause
vehicle or equipment damage or unsafe operation.
SAVE THESE INSTRUCTIONS