Snap-On ControlTech Micro, Инструкция пользователя

Страница: 9 / 36

8
Deleting Stored Torque and Angle Data
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight CLEAR DATA menu selection using UP/DOWN buttons then press ENTER button to display
CLEAR ALL DATA screen.
3. In CLEAR ALL DATA screen, highlight YES menu selection to delete all stored data, or NO menu
selection to exit without deleting data.
4. Press ENTER button after making selection.
Note: If wrench is Locked (see Preset Lock in Advanced section), Clear Data function is disabled.
Viewing and Clearing Wrench Cycle Counter
Each time torque or angle target is reached, wrench cycle counter is incremented. Maximum cycle
count is 999999.
1.
From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight CYCLE COUNT menu selection using UP/DOWN buttons.
3. Press ENTER button to display CYCLE COUNT screen.
4. To exit CYCLE COUNT screen without clearing count, press ENTER button while EXIT menu selection
is highlighted.
5. To reset wrench cycle count to 0, highlight CLEAR menu selection then press ENTER button.
6. EXIT menu selection is automatically highlighted after count is cleared. Press ENTER button to
return to main menu.
Note: If wrench is Locked (see Preset Lock in Advanced section) Clear count function is disabled.
Language
1. To select language menu, press ENTER button while LANGUAGE is highlighted then highlight
desired language and press ENTER button.
2. Decimal Mark selection menu is displayed. Decimal separator can be a comma or decimal point.
Use
UP/DOWN buttons to select decimal separator then press the ENTER button.
Note: Decimal separator will affect formatting of downloaded data when opened by Excel depending
on Windows® regional settings.
ENTER
button
held
Target Screen
UP/DOWN buttons
ENTER
button
ENTER
button
00
M
100.0
IN-LB
UP/DOWN buttons
EXIT
SET HEAD LENGTH
SHOW DATA
SET HEAD LENGTH
SHOW DATA
CLEAR DATA
CLEAR ALL DATA
YES
NO
CLEAR ALL DATA
YES
NO
SET HEAD LENGTH
SHOW DATA
CLEAR DATA
ENTER
button
held
Target Screen
UP/DOWN buttons
ENTER
button
00
M
100.0
IN-LB
EXIT
SET HEAD LENGTH
SHOW DATA
UP/DOWN buttons
COUNT: 12
CLEAR
EXIT
COUNT: 0
CLEAR
EXIT
SHOW DATA
CLEAR DATA
CYCLE COUNT
ENTER
button
COUNT: 12
CLEAR
EXIT
ENTER
button
SHOW DATA
CLEAR DATA
CYCLE COUNT
ENTER button