SMT WARRANTY – LIMITED Effective May 16, 2014
Parts – Spray Master Technologies warrants parts for wall mounted and rack mounted 600 series and 2000 series units to be free
from defects in material or workmanship for a period of 2 years from the date of shipment from the factory excluding items listed
below.
Spray Master Technologies warrants parts for all other units (wall mounted 1100 series and all portable units) to be free from defects
in material or workmanship for a period of 1 year from the date of shipment from the factory excluding items listed below.
This warranty is limited to the original purchaser and includes repairing or replacing parts which manufacturer’s investigation
shows to be defective at the time of shipment from the factory. All parts subject to this warranty shall be returned F.O.B. Spray
Master Technologies, Rogers, Arkansas for examination, repair, or replacement.
Excluded Items – The follow items are excluded: spray guns, wands, hoses, nozzles, Hummer Jet Sr & Jr, casters and handles. These
items are covered by the above warranty for 90 days from the date of purchase for defects in materials or workmanship.
Labor and Travel – Labor and travel to repair or replace defective parts shall be covered for a period of 1 year from date of shipment
(90 days on the excluded items).
Items Voiding Warranty – The following voids all warranty claims on Spray Master Technologies products: Accidental breakage;
abuse; misuse; failures caused by incorrect installation (if not factory installed); failure to correctly wire the system at the electrical
source; chemical or mineral buildup in the pumps and water lines caused by untreated or unfiltered tap, hard, or recaptured water;
excessive hot water temperatures exceeding 120° Fahrenheit (49° Celsius); using bleach as an injected chemical; or using hydrogen
peroxide as an injected chemical.
www.spraymastertech.com
Phone: (479) 636-5776 • Fax: (479) 636-3245 • 115 E. Linden • Rogers, Arkansas 72756 USA
SMT-WARRANTY-140516-EN
Specifications are subject to change without notice
Printed in the U.S.A.
Returned Goods Policy
Any item returned for warranty consideration or for credit
must have a
RETURN AUTHORIZATION
NUMBER
. Call our
Customer Service Department and discuss the nature of your
request. Please note that all items returned must be returned
F.O.B. Rogers, Arkansas. No collect or C.O.D. shipments will be
accepted unless prior arrangements with our Customer Service
Department have been made. A restocking fee may be applied
to items for credit that are not under warranty. To reach our
Customer Service Department call
(800) 548-3373
or
(479) 636-5776
, or write to Spray Master Technologies®,
115 E. Linden St., Rogers, Arkansas 72756.
Receiving
Damage:
Report any damage to the shipping carton or
contents to the freight carrier. File a claim with the carrier
within 10 days if damage is evident. The manufacturer is not
responsible for damage to the equipment caused by the
freight carrier.
Package Contents:
Carefully check the contents of the
shipping cartons to ensure the contents agree with the
packing list. If items are missing or if you have any questions,
please call our customer service department at
(800) 548-3373
or
(479) 636-5776
.
2
Receiving
2
Returned Goods Policy
2
Warranty
2
Service Requirements
3
Service
3
Model Identification
3
Warnings
4
Ground Fault Circuit Interruptor Protection
5
Grounding
5
Extension Cords
5
Assembly and Installation
5, 6, 7, 8
Operation
9, 10
Accessories
10
Moving and Storage
11
Maintenance
11
Chemical Metering Instructions
12
Table of Contents