EVB-UCS1002 Evaluation Board User Manual
SMSC EVB-UCS1002
37
Revision 1.1 (09-30-11)
PRELIMINARY - SMSC CONFIDENTIAL
Chapter 11 Demo Tab
The Demo Tab, shown in
, demonstrates external controller logic to apply custom emulation
profiles and optimize charging current. This feature uses the LabView engine to step through the
selected files and store the current drawn by the device. Several options are available to customize
the operation of the demo and explore the potential of the UCS1002.
11.1
Step 1: Configure Device for Demo Routine
The first step in preparing to run the Demo feature is to configure the device to the desired starting
configuration. A file has been pre-loaded at installation that can be used, or a new configuration can
be created. Each time the Demo button (in the Panel Control section) is toggled, the Configuration
Setup file will be loaded.
11.2
Step 2: Define Custom Emulation Configurations
At installation a set of files are pre-loaded on the users system (profile1.txt-profile6.txt) with the defualt
profiles of the UCS1002. These files can be changed easily by using the Custom Charging tab.
Figure 11.1 Demo Tab