EVB-UCS1002 Evaluation Board User Manual
Revision 1.1 (09-30-11)
34
SMSC EVB-UCS1002
PRELIMINARY - SMSC CONFIDENTIAL
Chapter 10 Register Set Tab
The Register Set Tab, shown in
, allows viewing and updating of the UCS1002 registers,
identifies the device on the EVB, and manages configuration files.
10.1
Register Content
Register Content, shown in
, is a scrollable list of the UCS1002 registers and the current
value. It is important to note that not all addresses are physical memory locations on the device; these
registers will read “0”. Likewise, some registers shown that are undocumented in the datasheet may
have data. Editing these registers can cause unexpected results.
To update a register value, locate the register address in the left column, type the new value in the
corresponding cell in the right column, and press the Enter key on the keyboard or click on another
part of the GUI.
10.1.1
Numbering Systems Views
The Register Content section allows values to be displayed using different numbering systems:
Decimal, Hex, Octal, Binary or SI Notation.
Figure 10.1 Register Set Tab
