EVB-UCS1002 Evaluation Board User Manual
Revision 1.1 (09-30-11)
36
SMSC EVB-UCS1002
PRELIMINARY - SMSC CONFIDENTIAL
10.4
Configuration Save and Load
The Register Set Tab contains controls, shown in
, which save the settings currently
configured in the UCS1002 to allow quick re-configuration at any time.
To save configuration settings, configure the UCS1002 as desired, then display the Register Set Tab.
In the File Stored Path box, type in a path, or select the folder icon to use a Windows-based navigation
aid to select the folder where the configuration file will be saved. The file should be named with the
extension “.txt” or similar text file format. Once a file name and location has been chosen, click the
“Save All Register Values” switch, and the file is saved.
Note:
If a file with the same name already exists, the file will be overwritten and old data will be lost.
The data is saved in 2 columns separated by tabs. The first column is the register address and the
second column is the register data.
Once a file is saved, it can be recalled at any time by selecting the file in the File Load Path box and
clicking the “Load All Register Values” switch.
Figure 10.3 Save / Load Section
