The installation of this appliance must be in accordance with all applicable local codes, or the National
Fuel Gas Code ANSI Z223.1 NFPA 54.
When purchasing or exchanging a cylinder for your gas grill, it must be:
1. Constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of
Transportation (DOT), and
2. Provided with a listed over-filling prevention device (OPD), and
3. Provided with a cylinder connection device compatible with the connection for outdoor cooking appliance.
1. Check that the cylinder valve is closed by turning the knob clockwise.
2. Place the cylinder into the tank support bracket on the bottom of the left brace. Then place tank retention wire
over cylinder handle and secure tightly.
3. Orient the cylinder such that the valve opening faces left side of grill and so that the hose is not kinked or damaged.
4. Make sure tank sits securely in tank support bracket.
Operating Instructions
LP GAS CYLINDER (TANK) SPECIFICATIONS:
INSTALLING THE LP GAS CYLINDER (TANK) ON TO THE GRILL:
20
