Smoke hollow SH9916, Руководство пользователя

Страница: 12 / 32

Grill Assembly
Step 14:
Procedure: Refer to Figs. 14A and 14B and
Slide the Lift Handle through the adjusting slot
and through the hole of the inside plate.
Align the hole in the end of the Lift Handle with
the holes in the “U” shaped bracket located at
the back of the Cabinet. Join the Lift Handle
and the “U” shaped Bracket by inserting a
Hinge pin as shown in Fig. 14C. Then insert an
“R” Clip through the hole in the Hinge Pin.
Attach the Lift Handle to the Lift System by
inserting a Hinge Pin through the “U” shaped Lift
Arm and the hole in the center of the Lift Handle
as shown in Fig. 14D. Then insert an “R” clip
through the hole in the Hinge Pin. You should now
be able to adjust the Charcoal Tray Lifting System
to your desired height by moving the Lift Handle
to the left and then raising or lowering it.
Assembly
Step 14: Assemble the Charcoal Tray
Lifting System
Locate : Charcoal Tray Lift System Lift Handle,
(2) Hinge Pins and (2) “R” Clips
Procedure : Refer to Figs. 14A and 14B and
Slide the Lift Handle through the adjusting slot
and through the hole of the inside plate.
Align the hole in the end of the Lift Handle with
the holes in the “U” shaped bracket located at
the back of the Cabinet. Join the Lift Handle
and the “U” shaped Bracket by inserting a
Hinge pin as shown in Fig. 14C. Then insert an
“R” Clip through the hole in the Hinge Pin.
Attach the Lift Handle to the Lift System by in-
serting a Hinge Pin through the “U” shaped Lift
Arm and the hole in the center of the Lift Han-
dle as shown in Fig. 14D. Then insert an “R”
clip through the hole in the Hinge Pin. You
should now be able to adjust the Charcoal Tray
Lifting System to your desired height by moving
the Lift Handle to the left and then raising or
lowering it.
Hole
Inside Cabinet
14
Assembly
Step 14: Assemble the Charcoal Tray
Lifting System
Locate : Charcoal Tray Lift System Lift Handle,
(2) Hinge Pins and (2) “R” Clips
Procedure : Refer to Figs. 14A and 14B and
Slide the Lift Handle through the adjusting slot
and through the hole of the inside plate.
Align the hole in the end of the Lift Handle with
the holes in the “U” shaped bracket located at
the back of the Cabinet. Join the Lift Handle
and the “U” shaped Bracket by inserting a
Hinge pin as shown in Fig. 14C. Then insert an
“R” Clip through the hole in the Hinge Pin.
Attach the Lift Handle to the Lift System by in-
serting a Hinge Pin through the “U” shaped Lift
Arm and the hole in the center of the Lift Han-
dle as shown in Fig. 14D. Then insert an “R”
clip through the hole in the Hinge Pin. You
should now be able to adjust the Charcoal Tray
Lifting System to your desired height by moving
the Lift Handle to the left and then raising or
lowering it.
Hole
Inside Cabinet
14
Assembly
Step 14: Assemble the Charcoal Tray
Lifting System
Locate : Charcoal Tray Lift System Lift Handle,
(2) Hinge Pins and (2) “R” Clips
Procedure : Refer to Figs. 14A and 14B and
Slide the Lift Handle through the adjusting slot
and through the hole of the inside plate.
Align the hole in the end of the Lift Handle with
the holes in the “U” shaped bracket located at
the back of the Cabinet. Join the Lift Handle
and the “U” shaped Bracket by inserting a
Hinge pin as shown in Fig. 14C. Then insert an
“R” Clip through the hole in the Hinge Pin.
Attach the Lift Handle to the Lift System by in-
serting a Hinge Pin through the “U” shaped Lift
Arm and the hole in the center of the Lift Han-
dle as shown in Fig. 14D. Then insert an “R”
clip through the hole in the Hinge Pin. You
should now be able to adjust the Charcoal Tray
Lifting System to your desired height by moving
the Lift Handle to the left and then raising or
lowering it.
Hole
Inside Cabinet
14
Assembly
Step 14: Assemble
the Charcoal
Tray
Lifting System
Locate
: Charcoal
Tray Lift System
Lift Handle,
(2) Hinge Pins
and (2) “R” Clips
Procedure
: Refer to Figs.
14A and 14B
and
Slide the Lift Handle
through the adj
usting slot
and through
the hole of the
inside plate.
Align the hole
in the end of the
Lift Handle
with
the holes in the
“U” shaped
bracket located
at
the back of the
Cabinet. Join the
Lift Handle
and the “U” shaped
Bracket by ins
erting a
Hinge pin as shown
in Fig. 14C. Then
insert an
“R” Clip through
the hole in the
Hinge Pin.
Attach the Lift
Handle to the
Lift System
by in-
serting a Hinge
Pin through
the “U” shaped
Lift
Arm and the hole
in the center of
the Lift Han-
dle as shown in
Fig. 14D. Then
insert an “R”
clip through
the hole in the
Hinge Pin. You
should now
be able to adju
st the Charcoal
Tray
Lifting System
to your desired
height by moving
the Lift Handle
to the left and
then raising
or
lowering it.
Hole
Inside Cabin
et
14
Fig. 14A
Fig. 14B
Fig. 14C
Fig. 14D
12