Smiths Medical SurgiVet V3404 Plus, Руководство по эксплуатации

Страница: 57 / 86

Chapter 10: Serial Output
Operation Manual SurgiVet
®
V3404 Plus 10-1
Chapter 10: Serial Output
Serial Out Menu
The
SERIAL OUT
menu allows the user to select a data format for output to the serial port, as well as select the
output interval or the amount of data to send. This data can be output to a computer or to a compatible printer.
Figure 9.1: Serial Out Menu, Patient Data
STOP PRINT
Select this to enable/disable serial output.
NURSE CALL
Select this to enable/disable the nurse call serial output.
DATA FORMAT
Shows data output format. [See Data Format later.]
INTERVAL
If
PATIENT DATA
format has been selected, this shows the amount of time between data log outputs.
PRINTER TYPE
Select either
RS-232
(text only) or
BCI PRINTER
(graphics).
SWEEP SPEED
If the BCI
®
printer has been selected, this shows the paper speed.
WARNING! When connecting this monitor to any instrument, verify proper operation before clinical use.
Refer to the instrument’s user manual for full instructions. Accessory equipment connected
to the monitor’s data interface must be certified according to the respective IEC standards,
i.e., IEC 950 for data-processing equipment or IEC 601-1 for electromedical equipment. All
combinations of equipment must be in compliance with IEC 601-1-1 systems requirements.
Anyone connecting additional equipment to the signal input port or signal output port
configures a medical system, and, therefore, is responsible that the system complies with the
requirements of the system standard IEC 601-1-1.
RR
/m
25
Q
Sp02 SENSOR!
STOP PRINT NO
NURSE CALL OFF
DATA FORMAT PATIENT DATA
INTERVAL EVERY 4 secs
PRINTER TYPE BCI PRINTER
SWEEP SPEED 25 mm/sec
[EXIT] (serial out menu)
n