manualshive.com logo in svg

Smith & Nephew Syncera Anthem, Хирургические техники

Поделиться
Скачать
Smith & Nephew Syncera Anthem Скачать руководство пользователя страница 10

8

4.

 Align the extramedullary tibial alignment guide parallel 

to the tibial axis in the coronal and sagittal planes. 
Rotate the assembly to the medial one-third of the tibial 
tubercle and impact the anterior spike of the up rod 
(Figure 10 and 10a).

Note: 3° of posterior slope is built into the cut block 
connector and 4° of slope is built into the articular 
insert.

5.

 Attach the tibial stylus to the universal cutting block by 

inserting the foot of the tibial stylus into the cutting slot 
of the universal cutting block.

6.

 Adjust the resection level by lowering the universal 

cutting block until the tibial stylus touches the low 
point on the less affected side of the tibia. The tibial 
stylus can be adjusted for 2mm (affected side) or 
9mm (unaffected side) tibial resection by reversing its 
position in the cutting slot of the universal cutting block 
(Figure 11).

7.

 Pin the universal cutting block to the tibia by inserting  

pins first through the central holes; then the medial 
hole (Figure 11a).

Figure 10a

Figure 11

Figure 11a

Содержание Syncera Anthem

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды