Instructions for the user
14
5
DESCRIPTION OF FRONT PANEL CONTROLS
All the cooker's control and monitoring devices are placed together on the front panel. The table below
provides the key to the symbols used.
FRONT RIGHT-HAND BURNER
CENTRAL BURNER
REAR RIGHT-HAND BURNER
CENTRAL BURNER
REAR LEFT-HAND BURNER
GAS OVEN THERMOSTAT
FRONT LEFT-HAND BURNER
OVEN LAMP / GRILL ROTISSERIE
SWITCH
REAR CENTRAL BURNER
ELECTRIC OVEN THERMOSTAT
FRONT CENTRAL BURNER
ELECTRIC OVEN FUNCTION KNOB
If the cooker is equipped with an electronic programmer, before using the oven check that the
symbol appears on the display; see point “8.1 Setting the time".
HOB BURNER CONTROL KNOB
To light the flame, press the knob and turn it anti-clockwise to the minimum flame
symbol . To adjust the flame, turn the knob to the zone between the maximum
(
) and the minimum ( ) settings. To turn off the burner, turn the knob to the
position.
HOB CENTRAL BURNER CONTROL KNOB
In this burner, either the central auxiliary burner only or both the burner rings can
be used. THE OUTER BURNER RING CANNOT BE OPERATED ON ITS OWN.
To light the inner ring or the whole burner, turn the knob to the minimum flame
symbol in zone
A
(for the inner ring) or zone
B
(for the whole burner) and keep it
pressed). To switch from zone
A
to zone
B
and vice-versa, apply further gentle
pressure to the knob. To adjust the flame, turn the knob to the zone between the
maximum (
) and the minimum ( ) settings. To turn off the burner, turn the
knob to the
position.
GAS OVEN THERMOSTAT KNOB
(ON SOME MODELS ONLY)
This knob lights the gas burner inside the oven. The cooking temperature is set
by turning the knob anti-clockwise to the value required, between
Min.
and
275°
C.
For instructions for lighting the gas oven, refer to point "7.3 Using the Gas Oven".
