Instructions for the Installer
11
3.3
Hob burner layout
BURNERS
1
Auxiliary
2
Semi-rapid
3
Rapid
4
Triple Flame
3.4
Adjusting the oven burner (for gas oven models only)
To adjust the oven burner, open the oven door and proceed as follows:
•
Remove the oven tray and its shelf.
•
Lift and extract the oven bottom.
3.4.1
Changing the oven + grill burner nozzle
•
Undo the oven burner fixing screw
A
.
•
Push the burner
B
to the right until the nozzle is
accessible.
•
Use a 13 socket wrench to change the nozzle, fitting
the one for the type of gas to be used (see point “3.2
Burner and nozzle characteristics table”).
3.4.2
Adjusting the oven + grill burner primary air flow
•
Undo the adjuster screw "
A
" of the air regulator sleeve.;
•
Turn the regulator sleeve "
B
" into the position for the type of gas to be used,
consulting the table below.
•
Tighten the adjuster screw and restore the seals.
•
When the operation is complete, reassemble the burner correctly.
NATURAL GAS (N)
G30/G31 (LPG)
X =
5 mm
15 mm
