Cleaning and maintenance
69
EN
3. Press the symbol
to confirm. The
assisted cleaning cycle starts.
4. If the temperature inside the oven is too
high, an acoustic signal will sound and a
warning message on the display will
indicate that you should wait for it to cool
down.
5. A buzzer will indicate the end of the
vapour clean cycle.
Programmed vapour clean cycle set-up
Like the other cooking functions the time at
which the vapour clean cycle starts can be
set.
1. After having selected the special function
Vapour Clean, press the symbol
.
2. Enter the required time for the Vapour
Clean function (for example 19.30: first
touch the hours box, then the numbers 1
and 9; next, touch the minutes box and
then the numbers 3 and 0).
3. Press the symbol
to confirm.
4. The appliance waits for the set start time
to be reached and then starts the
cleaning cycle.
