User instructions
•
Do not use table salt
as it contains insolub le sub stances
which, over time, may damage the water softening system.
•
When necessary, refill the regenerating salt container
before
starting the washing program
. In this way, the excess saline
solution will b e immediately removed b y the water; the
prolonged presence of salt water inside the tank may lead to
corrosion
.
Be careful not to confuse the salt and detergent packages
; adding
detergent to the salt container will
damage
the water softening system.
ADDITIONAL FUNCTIONS
(Customizing the consumer parameters)
(available in all programs except the soak program)
The electronic control system allows personalizing the machine use
directly through a program ming procedure not directly accessible
that allows: regulate water hardness level.
To access the programming environment, the
appliance
must
be turned
on with the
door open
. Then proceed as follows:
•
press the
PROGRAM DELAY
button
until the
H
symbol appears
on the display, followed by the number currently set (e.g.
H3
)
•
press the
PROGRAM DELAY
button the number of times
needed to select the right setting level for the hardness of the water
(
H0, H1, H2, H3, H4, H5
);
N.B.:
after few seconds the appliance exits the parameter setting menu
automatically.
21
