User instructions
STOPPING A PROGRAM
To cancel a program which is running:
•
Interrupt the program (s ee "
INTERRUPTING A PROGRAM
")
•
Press the
START/PAUSE
button
and hold it down; the
display will show
"P0"
and the dishwasher will immediately
switch to the end of the cycle and drain the tank (during
this process, the
"START/PAUSE
symbol will flash). When
the drain procedure ends, the end of cycle
"End"
message appears on the display.
In case that the door is opened during the operation, to the next
door closing it is going to b e necessary to start the program as
shown in paragraph
“
S
TARTING THE PROGRAM
”. The program will
resume from the point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 60 seconds later.
15
