User instructions
START PROGRAM
At this point, in order to start the machine, it is only enough to press the
START/PAUSE (6)
for some seconds until the symbol
START/PAUSE
(D)
start to flash and confirmation
“beep” is heard. From this moment the
cycle duration on the
DISPLAY (9)
starts to decrease.
This phase, that updates its elf during the c
ycle, is “indicative” since it is
influenced by the washing conditions such as dishwasher type and
quantity, entry temperature etc. For this reason it is normal to see
the updating during a program (increment and decrease of
minutes) specially in the passage from one phase to the other (for
example, from washing to rinse).
END PROGRAM
The end of the program is indicated by a short signal acoustic and from
the
“
End
” visual notification on
DISPLAY.
By pressing one of the
buttons, the
“
End
” visual signal will vanish from the display and
the dishwasher is ready to continue a new cycle.
INTERRUPTING A PROGRAM
In order to interrupt a running program it is necessary:
•
to press the
START/PAUSE
for some seconds until when
the symbol
START/PAUSE
remains lit on the display
(confirmation beep). At this point,it is poss ible to start the cycle
again, otherwise:
•
TO CHANGE A PROGRAM
To change the running program it is necess ary:
•
to interrupt the running program
(see “
I
NTERRUPTING A PROGRAM
”);
•
select the new program;
•
to press again the
START/PAUSE
button
to make start the new
program.
14