Instructions for the user
70
C
B
11.2
Removing the door
Open the door fully and insert the long part of pins
B
into holes
A
. Lift
the front part of the door approximately 10 cm, then remove it from its
housing by sliding it upwards.
B
A
B
To reassemble the door, put the
hinges in the relevant slots in the
oven, making sure that grooved
sections
C
are resting completely in
the slots. When the process is
complete, open the door fully and
remove pins
B
.
11.3
Oven door seals
To permit thorough cleaning of the oven, the seal
may be removed. Before removing the seal, take off
the door as described above. Once the door has
been taken off, lift the tabs at the corners as shown
in the figure.
11.4
Lubrication of gas taps
Over time the gas taps may become difficult to turn and get blocked.
Clean them internally and replace the lubrication grease.
This
procedure must be carried out by a specialised technician
.
