A
PPENDIX
B
| FAQ
How do I configure the Router for Internet access by Ethernet users?
– 123 –
N
OTE
:
Sometimes the connection cannot be disconnected although you
have specified a Max Idle Time, since some applications may be visiting the
Internet continually in the background.
N
OTE
:
If you are a Cable user, configure the Router following the above
steps.
H
OW
DO
I
CONFIGURE
THE
R
OUTER
FOR
I
NTERNET
ACCESS
BY
E
THERNET
USERS
?
1.
Log in to the Router, click “Network” on the web page menu, and then
click "WAN" on the submenu.
a.
On the WAN page, select “Dynamic IP” for the WAN connection
type.
b.
Finish by clicking
Save
.
2.
Some ISPs require that you register the MAC Address of your adapter,
which is connected to your cable/DSL Modem during installation. If
your ISP requires this, log in to the Router and click the "Network"
menu link, and then click the "MAC Clone" submenu link.
a.
On the “MAC Clone” page, click the "Clone MAC Address" button if
your PC’s MAC address is a proper MAC address. Your PC’s MAC
address will fill in the “WAN MAC Address” field.
Otherwise, type the MAC Address into the “WAN MAC Address” field.
The format for the MAC Address is XX-XX-XX-XX-XX-XX.
b.
Click the
Save
button. Settings take effect after rebooting.
Figure 117: MAC Clone
Содержание SMCWBR14S-N5
Страница 1: ...USER GUIDE BARRICADE N 150Mbps 4 Port Wireless Broadband Router SMCWBR14S N5...
Страница 23: ...23 TABLES Table 1 Key Hardware Features 25 Table 2 LED Behavior 26...
Страница 31: ...CHAPTER 2 Connecting the Router Connecting the Router 31 Figure 4 Client Router Mode WISP Signal Noteboook PC...
Страница 39: ...CHAPTER 3 Quick Installation Guide Quick Installation Guide 39 Figure 16 Quick Setup Finish...