C
HAPTER
4
| Configuring the Router
IP & MAC Binding
– 101 –
Click Enable to enable this entry.
Click the Clear button to clear a single entry.
Click the Clear All button to clear all entries.
Click the Save button to save all configurations.
N
OTE
:
1.
The conversion relation of bandwidth: 1Mbps = 1000Kbps.
2.
Please choose the Network Connection Type and set the bandwidth
according to your Network. If you are not clear about that, please
contact with your ISP for help.
3.
If no IP QoS item is enabled, the Bandwidth Apply won't be effective.
4.
IP address range for different entries could not have intersection with
each other.
5.
After the configurations, click the Save button for the change to take
effect.
IP & MAC B
INDING
There are two submenus under the IP &MAC Binding menu (shown in
Figure 92
):
Binding Settings
and
ARP List
. Click any of them, and you
will be able to scan or configure the corresponding function. The detailed
explanations for each submenu are provided below.
Figure 91: The IP & MAC Binding Menu
Содержание SMCWBR14S-N5
Страница 1: ...USER GUIDE BARRICADE N 150Mbps 4 Port Wireless Broadband Router SMCWBR14S N5...
Страница 23: ...23 TABLES Table 1 Key Hardware Features 25 Table 2 LED Behavior 26...
Страница 31: ...CHAPTER 2 Connecting the Router Connecting the Router 31 Figure 4 Client Router Mode WISP Signal Noteboook PC...
Страница 39: ...CHAPTER 3 Quick Installation Guide Quick Installation Guide 39 Figure 16 Quick Setup Finish...